CTEK MXT 4.0 24V Commercial Battery Charger

CTEK MXT 4.0 24V 4A COMMERCIAL BATTERY CHARGER

Advanced 24V battery charging and maintenaner suitable for all types of 24V battery systems

• CTEK - The Smartest Battery Chargers in The World
• ​Sophisticated battery and charger and maintainer
• Suitable for all types of 12V automotive battery
• Ideal for seasonal use vehicles 
• Two year manufacturer's warranty

The 8 step charger that’s ideal for smaller 24V batteries and maintenance charging for fleets with 24V vehicles.

The MXT 4.0 is a cost effective 8 step charger that delivers 4A to 24V batteries from 8-100Ah and is suitable for maintenance charging up to 250Ah. It can also be used in applications such as back-up systems, piste machinery, industrial cleaning machinery and wheelchairs.

The MXT 4.0 features battery diagnosis to establish whether your battery can receive and retain a charge, a Recond mode for restoring and reconditioning stratified and deeply discharged batteries, an optimised cold charging mode and an AGM battery charging mode. The charger also has a ‘Supply’ mode so it can be used as a power source.
 

Main Features

• Advanced 8 step "Connect & Forget" 24V battery charger and maintainer
• Charges all types of battery - wet, maintenance free, gel, AGM etc
• Temperature compensaion for improved cold weather performance as low as -20 C
• Suitable to charge and maintain batteries from 8Ah-100Ah (maintenance up to 250Ah)
• Rainproof/splashproof design IP65, suitable for outdoor use
• Mounting holes for wall mounting in your garage or workshop
• Includes eyelet connector lead and clamp connector lead
   

8 Step Fully Automated Charge & Maintenance Cycle

1. Desulphation; uses pulses to restore sulphated batteries
2. Soft start; Starting mode for charging cycle. To prepare the battery for bulk charging.
3. Bulk; Main charge until 80% of the charge is complete. Carried out at a constant current.
4. Absorption; Final part of the charge up to 100%. Carried out at a constant voltage.
5. Analysis; Checks the self-discharge rate.
6. Recond; This step is only used to restore deeply discharged batteries.
7. Maintenance charge – Float; Carried out at a constant voltage.
8. Maintenance charge – Pulse; uses pulses when necessary to keep the battery charge at the correct level.