MDS12 UPS Battery Kit - Replaces APC RBC12

MDS12 REPLACEMENT UPS BATTERY FOR APC - REPLACES RBC12

Suitable to replace the APC RBC12 replacement battery cartridge.

Features

• Kit comes pre-assembled with all cables and connectors as shown
• High quality CSB batteries as used by APC themselves
• Install date label to remind you when the kit was installed
• Battery recycling service for your old batteries
• Freephone telephone support on 0800 310 2100

Info

• Commodity Code / HS Code - 85072020
• Country of Origin (COO) - GB, Great Britain
• Shipping Info - Conforms to Special Provision A67 / UN2800

All MDS replacement UPS battery kits are assembled using high quality sealed lead acid batteries manufactured by CSB which are fitted by APC in both new equipment and also replacement battery cartridges.

MDS are the sole UK importer and distributor for CSB Batteries in the UK so you can be sure you are getting the exact replacements for the original CSB Batteries that were fitted at the APC factory when your UPS was manufactured.

Please note: APC & RBC are registered trade marks of American Power Conversion Corporation and MDS Battery Ltd use them for reference purposes only.

We would also wish to make it clear that MDS Battery Ltd are not an authorised APC dealer and this is not an APC product.

Battery Recycling

MDS offer a free battery recycling service - just send your batteries in to us and we'll do the rest - contact us for details.

Installation

The video below shows how simple the battery replacement procedure is it does not matter whether you are fitting our kit or an original APC RBC12 kit the method is the same. If you have any doubts about the fitting always refer to a competent engineer.

Once you have removed the front plastic panel and removed the screws that allow the battery compartment door to open it is a simple matter to remove the old batteries and re-install the new ones.